Guide for Pharmaceutical Manufacturing Industry Research & Development Medical Pharmacy Students FDA updates Guidelines
Custom Search

Monday, July 14, 2008

ENDOTOXIN CONTROLSterile Pharmaceutical Drug Products

Guidance for Sterile Pharmaceutical Drug Products Produced by Aseptic Processing — Current Good Manufacturing Practice

ENDOTOXIN CONTROL

Regulatory Guidelines to control endotoxin in sterile pharmaceuticals
21 CFR 211.63 states that “Equipment used in the manufacture, processing, packing, or holding of a drug product shall be of appropriate design, adequate size, and suitably located to facilitate operations for its intended use and for its cleaning and maintenance.”

21 CFR 211.65(a) states that “Equipment shall be constructed so that surfaces that contact components, in-process materials, or drug products shall not be reactive, additive, or absorptive so as to alter the safety, identity, strength, quality, or purity of the drug product beyond the official or other established requirements.”

21 CFR 211.67(a) states that “Equipment and utensils shall be cleaned, maintained, and sanitized at appropriate intervals to prevent malfunctions or contamination that would alter the safety, identify, strength, quality, or purity of the drug product beyond the official or other established requirements.”

21 CFR 211.94(c) states that “Pharmaceutical Drug product containers and closures shall be clean and, where indicated by the nature of the drug, sterilized and processed to remove endotoxin. pyrogenic  properties to assure that they are suitable for their intended use.”
Ad How to earn money on internet
21 CFR 211.167(a) states that “For each batch of drug product purporting to be sterile and/or pyrogen/ endotoxin, free, there shall be appropriate laboratory testing to determine conformance to such requirements. The test procedures shall be in writing and shall be followed.”

Endotoxin contamination of an injectable product can occur as a result of poor CGMP controls. Certain patient populations (e.g., neonates), those receiving other injections concomitantly, or those administered a parenteral in atypically large volumes or doses can be at greater risk for pyrogenic reaction than anticipated by the established limits based on body weight of a normal healthy adult . Such clinical concerns reinforce the importance of exercising appropriate CGMP controls to prevent generation of endotoxins. Drug product components, containers, closures, storage time limitations, and manufacturing equipment are among the areas to address in establishing endotoxin control.
Adequate cleaning, drying, and storage of equipment will control bioburden and prevent contribution of endotoxin load. Equipment should be designed to be easily assembled and disassembled, cleaned, sanitized, and/or sterilized. If adequate procedures are not employed, endotoxins can be contributed by both upstream and downstream processing equipment.
Sterilizing-grade filters and moist heat sterilization have not been shown to be effective in removing endotoxin. Endotoxin on equipment surfaces can be inactivated by high-temperature dry heat, or removed from equipment surfaces by cleaning procedures. Some clean-in-place procedures employ initial rinses with appropriate high purity water and/or a cleaning agent (e.g., acid, base, surfactant), followed by final rinses with heated WFI. Equipment should be dried following cleaning, unless the equipment proceeds immediately to the sterilization step.

FDA guidelines

What is CFR 21 PART 11

What is HEPA filter

Enzyme linked immunosorbent assay ELISA

Raido Immuno assay

http://whoguideline.blogspot.com/2010/04/terminalogy-and-their-explanations.html

Pharmaceutical Aseptic Manufacturing Process Terms , Terminology and Definations.

http://whoguideline.blogspot.com/2010/02/pharmaceutical-aseptic-manufacturing.html

Here are some articles which will be useful for you in further understanding of aspects of sterile dosage form manufacturing and regulatory affairs and good manufacturing practice in pharmaceutical industry

Pharmaceutical Validation

Types of validations in pharmaceutical manufacturing


Requirements of documents for validation of sterilisation process

How to investigate OOS out of specification results

Determination of Phenol coefficient of a disinfectant

Sterility testing

Clean Room Classification

Time limitations in sterile pharmaceuticals processing

Aspects of validation of manufacturing process in sterile pharmaceuticals

Clinical Trials

Controling Pyrogens in injectable dosage forms

Media fill run process simulation aspects Validation of Aseptic Process and Sterilisation

New Drug Application (NDA) how to make a New Drug Application (NDA) to US FDA

Abbreviated New Drug Application (ANDA) What is ANDA , detaied information about ANDA preparation and submission to US FDA

How to make Investigational New Drug (IND) Application to US FDA

Drug applications submission to us fda Over the counter Drugs OTC drugs

BIOAVAILABILITY AND BIOEQUIVALENCE REQUIREMENTS

Eletronic record in pharmaceutical manufacturing industry

Good manufacturing practice in pharmaceutical industry

Pharmaceutical industry pharmaceutical companies and FDA latest updates

Here is an interesting article on world wide pharmaceutical industry
Article on Pharmaceutical Industry pharmaceutical industry

This Website is a Guide for Pharmaceutical Manufacturing Pharmacy Students Pharmacy Colleges and Pharmacists pharmaceutical companies health care professionals and pharmaceutical industry and pharma manufacturers

To Find Pharmaceutical jobs and make a Pharmaceutical careers see here pharmaceutical companies
---------------------------------------------------------------------------------------------------
This Guidance is published by US FDA on September 2004
We also recommend our readers to visit US FDA'S website for undated guidances on sterile drug products

No comments:

Like This Website on Facebook and Stay Connected Share This Article with your Friends




Latest Pharma Update

USFDA approves first drug Inmazeb to treat Ebola Virus Infection

US FDA approved first drug to treat Ebola Virus Infection (zaire ebolavirus) . So far there was no drug treatment available for Ebola virus ...

You May Also Like

If you are looking for latest Pharmaceutical Manufacturing Guidelines of USFDA, UKMHRA, TGA WHO GMP then this website is one of most popular source.
Subscribe to this website by providing your email


Enter your email address get latest Pharma Guideline and technology update by email whenever this website is updated