The guidelines published by US FDA in Jan 2011 on current good manufacturing practices (CGMP) and process validation aligns with a product lifecycle activities concept and process validation activities and also with existing US FDA guidelines on validation, including the FDA and International Conference on Harmonisation (ICH) guidances for industry, Q8(R2) Pharmaceutical Development, Q9 Quality Risk Management, and Q10 Pharmaceutical Quality System.
US FDA states in its guidelines on process validation that they encourages the use of modern pharmaceutical development concepts, quality risk management, and quality systems at all stages of the manufacturing process lifecycle. Also see ( process validation in pharma )
The lifecycle concept links product and process development, qualification of the commercial manufacturing process, and maintenance of the process in a state of control during routine commercial production.The term commercial manufacturing process refers to the manufacturing process resulting in commercial product (i.e., drug that is marketed, distributed, and sold or intended to be sold). For the purposes of this guidance, the term commercial manufacturing process does not include clinical trial or treatment IND material.
In the following sections, FDA describe general considerations for process validation, the recommended stages of process validation, and specific activities for each stage in the product lifecycle.
In all stages of the product lifecycle, good project management and good archiving that capture scientific knowledge will make the process validation program more effective and efficient. The following practices should ensure uniform collection and assessment of information about the process and enhance the accessibility of such information later in the product lifecycle.
FDA says they recommend an integrated team approach to process validation that includes expertise from a variety of disciplines (e.g., process engineering, industrial pharmacy, analytical chemistry, microbiology, statistics, manufacturing, and quality assurance). Project plans, along with the full support of senior management, are essential elements for success.
Throughout the product lifecycle, various studies can be initiated to discover, observe, correlate, or confirm information about the product and process. All studies should be planned and conducted according to sound scientific principles, appropriately documented, and approved in accordance with the established procedure appropriate for the stage of the lifecycle.
The terms attribute(s) (e.g., quality, product, component) and parameter(s) (e.g., process, operating, and equipment) are not categorized with respect to criticality in this guidance. With a lifecycle approach to process validation that employs risk based decision making throughout that lifecycle, the perception of criticality as a continuum rather than a binary state is more useful. All attributes and parameters should be evaluated in terms of their roles in the process and impact on the product or in-process material, and reevaluated as new information becomes available. The degree of control over those attributes or parameters should be commensurate with their risk to the process and process output. In other words, a higher degree of control is appropriate for attributes or parameters that pose a higher risk. The fda says it recognizes that terminology usage can vary and expects that each manufacturer will communicate the meaning and intent of its terminology and categorization to the FDA.
Many products are single-source or involve complicated manufacturing processes. Homogeneity within a batch and consistency between batches are goals of process validation activities. Validation offers assurance that a process is reasonably protected against sources of variability that could affect production output, cause supply problems, and negatively affect public health. Also see ( process validation in pharma )
Process validation and its regulatory, statutory requirements.
Process Validation and Drug Quality Approach to Process Validation.
Quality assurance in pharma industry
Quality by designe concept for pharmaceutical industry
Quality by designe concept in pharmaceutical industryan explanation
US FDA limits dosage of acetaminophen to 325 mg per unit dosage form,Requires boxed warning on lables
What is an Isolator in pharmaceutical manufacturing
What is a Laminar Air Flow Cabinet?
21 cfr part 11 FDA guidelines .
Media Fill Run To Ensure Sterility In Sterile Dosage Forms
What is HEPA filter?
Clean Room Classification
Pharma sales jobs Find best Jobs in Pharmaceutical company